Planetary centrifugal Solder Paste Mixer SR-500

Special purpose machine 
that can optimize temperature 
and viscosity preparations 
and dispersion and deaeration 
of solder paste at the same time

Can prepare uniform viscosity in a short time for solder paste just taken from cold storage without bringing it back to room temperature. Metal particles with high specific gravity such as solder particles settle to the bottom of containers in cold storage and cause differences in material viscosity. The SR-500 regulates the viscosity of solder paste in a short time, with uniform viscosity from top to bottom. Also, because it can remove air bubbles thought to cause spattering of solder balls, it contributes to reducing the defect rate.

Features

Can immediately prepare cold stored solder paste without bringing it back to room temperature
By optimizing the mixing recipe, viscosity preparation and temperature preparation for solder paste is easy.
Removes large air bubbles in the paste, which are considered the cause of solder paste defects.
Handles commercial 500g solder paste containers as is
Restirs and redisperses solder paste that has been used
Supports solder paste in syringes by using the optional adapter

Unit dimensions/H380XW300XD340 (mm)
Unit weight/approx. 18kg
Max. processing volume/
When using a 150ml container (equivalent to 500g commercial solder paste container)
150ml・520g (net)
150ml・560g (gross ※not including adapter)